Flashing

Business / Construction / Flashing: Sheet metal or other material used in roof and wall construction to protect a building from water seepage.
Search Google for Flashing:

Step Flashing

Business / Construction / Step Flashing: Flashing application method used where a vertical surface meets a sloping roof plane. 6' X 6' galvanized metal bent at a 90 degree angle, and installed beneath siding and over the top of shingles. Eac MORE

Valley Flashing

Business / Construction / Valley Flashing: Sheet metal that lays in the 'V' area of a roof valley. MORE

Z-Bar Flashing

Business / Construction / Z-Bar Flashing: Bent, galvanized metal flashing that's installed above a horizontal trim board of an exterior window, door, or brick run. It prevents water from getting behind the trim/brick and into the home. MORE

Fireplace Chase Flashing Pan

Business / Construction / Fireplace Chase Flashing Pan: A large sheet of metal that is installed around and perpendicular to the fireplace flue pipe. It's purpose is to confine and limit the spread of fire and smoke to a small area. MORE

Counter Flashing

Business / Construction / Counter Flashing: A metal flashing usually used on chimneys at the roofline to cover shingle flashing and used to prevent moisture entry. MORE

Cap Flashing

Business / Construction / Cap Flashing: The portion of the flashing attached to a vertical surface to prevent water from migrating behind the base flashing. MORE