Flange: 1. The back edge of the sole (bottom) of an iron club (usually associated with the sand wedge) 2. A style of putter head with a slightly projecting rear-bottom edge

 

Related Words

Flange: 1. The back edge of the sole (bottom) of an iron club (usually associated with the sand wedge) 2. A style of putter head with a slightly projecting rear-bottom edge

C Flange: A type of flange used with close coupled pumps, speed reducers, and similar applications where the mounting holes in the f flange are threaded to receive bolts. Normally the 'C' Flange is us . . . View Full Definition

D Flange: A special end shield with holes for through bolts in the flange and is primarily used for mounting the motor on gear boxes or bulkheads. Standardized for frames 143T through 445T. 'D' flange . . . View Full Definition

P Base: A special mounting similar to 'D' flange except with a machine fit tenon recessed instead of protruding. Usually found on pumps.

TJI Or TJ: Manufactured structural building component resembling the letter 'I'. Used as floor joists and rafters. I-joists include two key parts: flanges and webs. The flange or from of the I joist ma . . . View Full Definition

I-Joist: Manufactured structural building component resembling the letter 'I'. Used as floor joists and rafters. I-joists include two key parts: flanges and webs. The flange of the I joist may be mad . . . View Full Definition

Sand Iron: (also 'sandwedge, sand wedge') a lofted club with a flange specifically designed for (but not limited to) use in the sand

Sand Wedge: (also 'sandwedge, sand iron') a lofted club with a flange specifically designed for (but not limited to) use in the sand

Collar: (also called 'apron, fringe, frog hair') the short grass that separates the putting green from rough or fairway

Coped: Removing the top and bottom flange of the end(s) of a metal I-beam. This is done to permit it to fit within, and bolted to, the web of another I-beam in a 'T' arrangement