Z-Bar Flashing: Bent, galvanized metal flashing that's installed above a horizontal trim board of an exterior window, door, or brick run. It prevents water from getting behind the trim/brick and into the home.

 

Related Words

Z-Bar Flashing: Bent, galvanized metal flashing that's installed above a horizontal trim board of an exterior window, door, or brick run. It prevents water from getting behind the trim/brick and into the home.

Valley Flashing: Sheet metal that lays in the 'V' area of a roof valley.

Step Flashing: Flashing application method used where a vertical surface meets a sloping roof plane. 6' X 6' galvanized metal bent at a 90 degree angle, and installed beneath siding and over the top of shi . . . View Full Definition

Flashing: Sheet metal or other impervious material used in roof and wall construction as a barrier to water seepage.

Counter Flashing: A metal flashing usually used on chimneys at the roofline to cover shingle flashing and used to prevent moisture entry.

Fireplace Chase Flashing Pan: A large sheet of metal that is installed around and perpendicular to the fireplace flue pipe. It's purpose is to confine and limit the spread of fire and smoke to a small area.

Cap Flashing: The portion of the flashing attached to a vertical surface to prevent water from migrating behind the base flashing.